Magnetic separator equipment

PTMS MAGNETIC SEPARATOR Mechanical scrubbing is to remove the film iron on the surface of quartz sand and the iron-bearing minerals adhering to the surface of quartz sand by the collision and friction of mechanical external forces and sand particles. At present, the scrubbing technology is mainly rod scrubbing and mechanical scrubbing. For mechanical scrubbing, it is generally believed that the factors affecting the scrubbing effect are mainly the structural characteristics and configuration of the scrubbing machine, followed by process factors, including scrubbing time and scrubbing concentration.

PTMS magnetic separation

PTMS MAGNETIC SEPARATOR The efficiency of mechanical scrubbing increases with increasing slurry concentration because increasing slurry concentration increases the probability of collisions between particles. The study shows that the best effect is between 50% and 60% of the concentration of sand scrubbing. In principle, the scrubbing time is based on the initial product quality requirements, and should not be too long. Because the time is too long, it will increase equipment wear, increase energy consumption and cause an increase in the cost of mineral processing and purification.

what is magnetic separation method for concentration of ore？

If the high efficiency and strong scrubbing is used, combined with the appropriate process and PTMS MAGNETIC SEPARATOR equipment, the rod friction washing effect will be better, because the dosing can increase the electrical repulsion of the surface of the impurity minerals and quartz particles, and enhance the separation effect between the impurity minerals and quartz particles.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com