PTMS magnetic separation is a dual separation method with magnetic absorption and centrifugation
eriz magnetic separator
The first disk body and the second disk body rotate in the same direction on the PTMS magnetic separation frame, and the speed of the first disk body is greater than that of the second disk body; The magnetic separator is arranged in the center of the barrel body, the center of the barrel body is provided with a slagging pipe aligned with the center of the magnetic separator, the slagging pipe is arranged under the magnetic separator disk, the upper end of the slagging pipe is communicated with the center of the magnetic separator disk through the hole, the slagging pipe is arranged through the bottom wall of the barrel body, and the ore discharge port is arranged on the side wall of the barrel body.
PTMS magnetic separation
The magnetic separation device uses the double separation method of magnetic absorption and centrifugation to fully separate the pulp from the iron, the principle is: the pulp from the PTMS magnetic separation in the first disc body tribe on the first disc body, under the action of centrifugal force, the pulp forms a liquid film on the first disc body and diffuses outwardly, this process can make the slurry fully contact with the first disc body.
what is magnetic separation in Feldspar?
The helical magnetic unit under the first disk body can adsorb iron on the PTMS magnetic separation surface of the first disk body. At the same time, with the rotation of the helical magnetic unit relative to the first disk body, the iron gradually moves closer to the center of the first disk body under the guidance of the vortex baffle until it falls into the central through hole. The grout is thrown out of the disc and sprinkled in the barrel under the action of centrifugal force, so as to achieve full separation of the grout and iron.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com
