The dissociation of ferromagnetic impurities from the ore is achieved through PTMS magnetic separation
Magnetic separator
Potassium feldspar PTMS magnetic separation in addition to iron before need to understand the following problems: the formation of iron occurrence: iron in feldspar often in magnetite, red ore, micite, chlorite, ilmenite, etc, the above several forms have magnetic characteristics, can completely through magnetic separation this low cost way to reduce the iron content.
PTMS magnetic separation
Of course, iron will also exist in the ore in the form of no magnetic characteristics, the separation of magnetic particles from the ore: if the block ore without iron (mineral iron), there is only one possibility: iron in the ore with iron oxide, this particle size PTMS magnetic separation iron removal often does not achieve satisfactory results, because the iron and mineral are not dissociated.
what is magnetic separation method?
Generally speaking, material 30 target particle size, ferromagnetic impurities and ore have been basically dissociated, can achieve better results through the PTMS magnetic separation way. In addition: 200 mesh (sieve) with thick, dry iron removal will achieve good results.-200 mesh powder, it is best to use the wet process to remove iron.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com
