Welcome to Foshan Powtech Technology Company Limited!https://www.powtechina.com
Which chemical raw materials are used as dispersants for the PTMS Electromagnetic Separator process
published date: 2024/7/17

water separator manufacturers

Selective dispersion-flocculation PTMS Electromagnetic Separator process, in the process, the kaolin raw ore (crude concentrate after hydrocyclone separator) is added water to make a solid content of about 10% slurry, and then add dispersant, fully stirred and dispersed, the amount of dispersing agent per ton of kaolin is 1.0-3.0 kg.

PTMS magnetic separation


Any of water glass, sodium hexadetaphosphate, sodium polyphosphate or sodium humate can be used as dispersant in the PTMS Electromagnetic Separator process, among which sodium polyphosphate and sodium humate have good selectivity. When used alone, the best dosage of various dispersants is 3000 g / ton, sodium hexadylphosphate 2400 g / ton, sodium polyphosphate 2400 g / ton, and sodium phytate 1000 g / ton.

what is magnetic separation method for concentration of ore?


In the dispersed kaolin slurry, the coarse particles such as kaolinite can be separated from the fine iron impurity particles suspended in the upper layer by gravity subsidence (settlement time is 45 minutes). The lower pulp is supplemented with dispersant for stirring and dispersion. The dispersant is commonly used as sodium hexadetaphosphate, the dosage is 1200 g / ton, separated after 30 minutes of settlement, and the lower pulp is kaolin concentrate. PTMS Electromagnetic Separator Iron (FE2O3) can be removed from the kaolin slurry.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com

QUARTZ PTMS magnetic separation 20240717

Share to:

Powtech Machinery Company produce magnetic separator, Industrial Magnetic Separators, Industrial magnetic separation equipments,Magnetic Equipment,Permanent Suspension Magnet,Vibrating Equipment