Check whether the particle size of the feed meets the requirements of PTMS magnetic separation
water cooling electromagnetic separator for Feldspar
For the feed inlet blockage, check whether the particle size of the feed meets the requirements of PTMS magnetic separation equipment. If the feed particle size is too large, it may be stuck at the feed port. When the maximum feed particle size specified by the equipment is 10mm, but there are particles greater than 10mm present in the actual feed, it is easy to cause blockage.
PTMS magnetic separation
Also check for the presence of foreign bodies in the feed, large stones, metal blocks or woven bag fragments, which may block the PTMS magnetic separation feed port or subsequent access. Inside the equipment, check whether the size of the channel is normal, for deformation or narrowing. Check whether the operating parameters of the equipment are appropriate, and whether the slurry concentration is too high in the wet iron removal equipment.
how to separate two magnets?
PTMS magnetic separation In the long-term material erosion or external pressure, the pipeline may deform, resulting in the narrowing of the channel, resulting in material blockage. For the equipment with a mixing device, check whether the mixing device is working normally. If the mixing device fails, the material is easy to precipitate or block inside the equipment, thus causing blockage.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com
