Wet type Electromagnetic Separator

Check the PTMS Electromagnetic Separator inlet, remove the debris around the inlet, and then check whether the inlet interior is smooth. A flashlight can be used to illuminate the feed inlet for clearer observation. If there is a blockage in the inlet, remove it carefully and be careful not to damage the structure of the inlet. For the equipment with feed valve, check whether the switch of the valve is flexible and the sealing performance of the valve is good.

PTMS magnetic separation

Check the discharging device to check whether there is material accumulation or blockage in the discharging outlet. Wet PTMS Electromagnetic Separator, but also check whether the flow is stable, the concentration of pulp meets the requirements. We can determine whether the pulp concentration is normal by sampling at the discharge port.

what is magnetic separation in science？

For dry PTMS Electromagnetic Separator, check whether the particle size of the discharge is uniform and whether the discharge also contains more iron impurities. Simple magnetic detection tools (such as small magnet) can be used to detect the preliminary iron content of the discharge. Protective gloves can prevent operator hand injuries during operations, such as when inspecting parts with sharp edges or conducting electrical inspection.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com