drum separator

PTMS MAGNETIC SEPARATOR

what is magnetic separation process？

Electromagnetic wet PTMS electromagnetic separator reducer in the operation may appear high temperature, abnormal sound, oil leakage and other problems, for which the reason may be we want to know. Mechanical transmission is inseparable from lubricating grease, grease play the role of lubrication on the one hand and then on the other hand is cooling. During the operation of the reducer of PTMS electromagnetic separator, a large amount of heat will be generated from the friction of the gear, bearing and other rotating parts, which will lead to the increase of the temperature of lubricating oil in the reducer, the volume expansion of gas and grease in the box, and some gases will be squeezed out and discharged through the exhaust valve. If the exhaust valve is blocked, the temperature will rise sharply in the reducer casing, and the pressure will increase continuously, thus creating a higher internal pressure. If this pressure and temperature cannot be released, it will work on all parts in the box body. In the case of force and reaction force, the parts that can bear low pressure will be destroyed first under the action of pressure, finally causing various problems of the whole reducer.
Through field observation of a lot of homework, we found that the electromagnetic wet PTMS electromagnetic separator at run time with a small amount of pulp with cylinder do circular motion, flying to the top of the reducer on the exhaust valve, the exhaust valve block, gas cannot effectively discharge, cause of the reducer temperatures soared to more than 65 degrees Celsius, lead to seal failure. At this time, the air pressure in the reduction gear increases with the increase of the working temperature of the reduction gear, leading to the leakage of the lubricating oil in the reduction gear from the gap under the action of pressure, and even the damage of the gear and bearing of the reduction gear, leading to the abnormal sound of the reduction gear.
Which metal cannot be separated by magnetic separation?
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com