Magnetic separation machine

The early beneficiation process has been reformed several times to form a new process. The process of magnetic separation tailings (that is, concentrate to ore, concentrate recovery from here, the same below) slag removal, low intensity magnetic separation after iron removal into coarse (+ 0.1 mm), fine (0. 1 ~ 0. 045 mm) and fine (-0.045 mm) three particle level, Among them, the coarse and fine grade concentrate with a grade of 46.5% was obtained after high intensity magnetic separation, gravity separation and electric separation, while the micro-fine grade was discharged as tailings due to the limitations of the beneficiation technology and equipment at that time. PTMS magnetic separator is the best choice.

PTMS MAGNETIC SEPARATOR

Previously, the annual production capacity of qualified concentrate was 50,000 tons, and the annual output of concentrate was 100,000 tons after the addition of one production line. The successful construction of the process makes the beneficiation business of the plant realize the transformation from nothing to existence. PTMS magnetic separator is the best choice.

what is magnetic bead separation?

This process uses PTMS magnetic separator to solve the original main problems:
(1) The improved fine particle size has not been recovered, and although the nominal fine particle size is -0.045 mm, there are still more + 0.045 mm ore particles in this particle size due to the low classification efficiency of hydraulic classification equipment.
(2) because the high intensity magnetic separator is flat ring type, the magnetic medium often occurs blockage, and the equipment maintenance is difficult (high intensity magnetic separation operation is cancelled).
(3) There are many links in the process of changing classification and concentration, and the loss rate of ore products in the overflow is high.
(4) improve the operation recovery rate of gravity separation and electrical separation is low.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com