kaolin clay magnet requirements

PTMS MAGNETIC SEPARATOR

what is magnetic separation in Kaolin？

For the ceramic raw materials, kaolin and various mining materials, after being crushed and dissolved in water to form a slurry, in which the iron and materials are in a separated state, the iron removal equipment is specially designed. The device has the characteristics of good iron removal effect, large iron removal, continuous work and low energy consumption. After being used by the manufacturer, the device reflects well. (This machine uses two patented technologies) Features:      1. This machine is a new design, adopting full hydraulic power system, strong power, stable operation and low failure rate. 2. This machine uses a special formula of high-quality magnetic material to ensure stable iron removal effect and reduce machine cost by using magnetic attenuation and high magnetic strength for 6 years or even longer. At the same time, the magnetic bar can also be assembled with different magnetic materials according to different needs of users to meet the user's iron removal requirements. 3. In order to obtain a good iron removal effect, the volume of the iron chamber is 0.2 cubic meters, in which the mud can be retained for a longer period of time, and the contact time and probability of the magnetic rod are greatly increased, and the vertical arrangement of the magnetic rods The method can make the mud adhered to the magnetic rod flow back to the raw material pool in the shortest time when the iron is cleaned, which reduces the waste of the mud and shortens the iron cleaning time. 4. Add a stirring device parallel to the bottom plane of the iron drum under the magnetic rod group to make the slurry roll from bottom to top, and the magnetic rod and the mud form an organic combination of static and dynamic, this method can be The contact probability of the mud and the magnetic material is increased by several tens of times or even hundreds of times than that of the normal slurry flowing magnetic material, and the iron has no dead angle, and the sedimentation of the mud is prevented, and the fluidity is improved. This technology is the first in the iron removal equipment and has obtained national patents. 5. When the iron is cleaned, the insert type iron plate is used. The iron plate can completely cover the top of the iron drum, thus completely avoiding the change of the mud concentration caused by the washing water entering the mud during the iron cleaning. 6, can be used for small production lines, but also can be used as an enhanced model of the production line with strict iron requirements. They can be used alone or in combination. It can also be used to remove iron from glaze (when glaze is removed from iron, its output and effect when removing iron are much better than the electromagnetic iron remover and magnetic plate remover currently used). 7. When the machine is used for clearing iron, it can be recycled water. It does not need to use clean water, which improves the recycling rate of water resources.