magnetic separation diagram

PTMS MAGNETIC SEPARATOR

what is magnetic bead separation ？

1In the same production line, permanent magnet electromagnetic mixing can be used. Firstly, the permanent magnet separator with weak magnetic field is used to remove the strong magnetic iron impurities. The purchase price and the use cost are higher, but the magnetic field is stronger. High-power electromagnetic iron remover.

2. When selecting the diameter of the permanent magnet iron removal rod, it should not be too large. Because increasing the surface area of the magnetic source in contact with the iron impurities, the chance of capturing the prey can be increased, although increasing the straightness can increase the surface area of a rod, but the permanent magnet source material reduces the straightness of the magnetic rod under the same weight. The number of roots can be increased to greatly increase the surface area. When the cross section of the large flow slurry is high, it can be processed in the form of a multi-layer magnetic rod stack.

3 The old magnetic bar is magnetized and refurbished. As long as the magnetic rod sleeve is not rotten, the magnetic core is not oxidized and deteriorated, and the retreading can reach the original level and the effect is the same, and the investment can save about 50%.